Eltek Solar Charger Flatpack2 48/3200 HE Solar Flatpack2 HE solar 3200W Flatpack2 48V solar charger (241119.650 )
Eltek Solar Charge Extension Kit 2U/3U shelf with Flatpack2 48/3200HE Flatpack2 48/1500HE (CTZ00000.1358 )
Solar Extension Kit - 2U /3 U shelf solution
Specially designed with the MC4 connectors for cables from PV panels, service switches and optional SPDs. The front and rear MC4 connection mechanism enables easy on-site installation into both outdoor and indoor enclosures.
Key features
- Flatpack2 HE solar with MPPT
- Hot pluggable modules
- Earth fault detection
- Max PV capacity 6.4kW
- PV connection panel
- MC4 connectors
- Service switches
- DC SPD Type 1+2 (option)
Parameters :
|
|
|
|
|
|
|
| MODEL | 2U SOLAR EXT. KIT | 3U SOLAR EXT. KIT |
| Part number | CTZ00000.1358 | CTZ00000.1255 |
|
| POWER MODULES |
|
| Flatpack2 Solar Charger 1) | Flatpack2 48/3200 HE Solar |
|
|
|
| Peak efficiency | 97 % |
|
|
|
| Max no. of modules | Up to 2pcs | Up to 4pcs |
|
| INPUT DATA (SOLAR CHARGER) |
| Voltage (operating range) | 85-420 VDC |
|
|
|
| Voltage (MPPT range) 2) | 100-380 VDC |
|
|
|
| Voltage (start-up) | 150 VDC |
|
|
|
| Maximum current | 20.3 ADC |
|
|
|
| Protection | Fuse, varistor for transient protection, reversed polarity, shutdown when VIN is too low, earth fault check during start-up |
| PV CONNECTION PANEL |
|
| Service switches for PV arrays | 2 pcs 2-pole | 4 pcs 2-pole |
|
| MC4 connectors | 4 pcs (2 pcs per one PV array | ) 8 pcs (2 pcs per one PV array) |
| DC SPD (option) | Up to 2 pcs (Type 1+2) | Up to 4 pcs (Type 2) |
|
| OUTPUT DATA |
|
| Voltage (default) | 53.5 VDC |
|
|
|
| Voltage (adjustable range) | 42 3) - 57.6 VDC |
|
|
|
| Max power, VIN ≥ 170 VDC | 6400 W | 12800 W |
|
| Max current, @VOUT = 48 VDC | 133 A | 266 A |
|
| Protection | Overvoltage shutdown, short circuit proof, high temperature, hot plug-in inrush current limiting |
|
| OTHER SPECIFICATIONS |
|
| Alarms (Red LED) | High and low temperature shutdown, Converter Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure |
| Warnings (Yellow LED) | Low input voltage, Converter in power derate mode, Remote current limit activated, Input voltage out of range, flashing at overvoltage |
| Normal (Green LED) | Input and output ok |
|
|
|
| Operating temperature | -40 to +75 °C [-40 to +167 °F] 3) |
|
|
| Storage temperature | -40 to +85 °C [-40 to +185 °F |
|
|
|
| Dimensions (W x D x H) 5) | 482 x 384 x 89 (2U) mm [19 x 15.1 x 3.5 inch] | 482 x 384 x 133 (3U) mm [19 x 15.1 x 5.3 inch] |
| Weight (excluding modules) | Approximately 7 kg [15 lbs] | Approximately 10 kg [22 lbs] |
| DESIGN STANDARDS |
|
| Electrical safety | EN 60950-1:2006/A2:2013, EN 62368-1:2020/A11:2020, EN 62109-1:2010/-2:2011 |
| EMC | ETSI EN 300 386 v1.3.2 EN 61000-6-1:2019, EN 61000-6-2:2019, EN 61000-6-3:2007/A1:2011/AC:2012, EN 61000-6-4:2019 |
|
| Environment | ETSI EN 300 019-2-1 v2.3.1:2017 (Class 1.2) ETSI EN 300 019-2-2 v2.4.1:2017 (Class 2.3) ETSI EN 300 019-2-3 v2.4.1:2015 (Class 3.2) ETSI EN 300 132-2 v2.6.1:2019 Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised |
| 1) See Flatpack2 Solar charger datasheet for details 2) At nominal output voltages. MPPT will operate down to 100V, but the maximum input current limitation will de-rate maximum output power 3) Stand-by / test operation (VOUT < 48 VDC) limited for VIN > 250 VDC 4) +45 to +75 °C [+113 to +167 °F] with de-rated performance 5) Recommended minimum cabinet depth is 400 mm [15.7 inch] |
Related Products :
Solutions
We offer a truly comprehensive and distinct solution set for Telecommunication Companies, both within China and on the global stage. Our journey starts with an in-depth site survey, where we leave no stone unturned to understand the unique environment and requirements of each location. Leveraging this insight, we craft highly professional and forward-thinking plans that are precisely tailored to each customer's specific demands. Our technical support team is a powerhouse of expertise, ready to tackle any challenge with speed and precision. And our maintenance services are a proactive safeguard, ensuring that telecom systems run smoothly and efficiently at all times. With a team of top-tier professionals and a far-reaching network of trusted partners around the world, we are uniquely positioned to deliver unparalleled value to our clients.
FAQ :
1.How do you ensure product quality?
A: Before every product is shipped, we conduct comprehensive testing. This includes simulating real - world usage scenarios, running load and full - load tests, as well as current sharing tests, leaving no room for quality issues.
2.What's the lowest quantity I can order?
A: We don't impose a minimum order quantity. Whether you need just one item or a large batch, we can accommodate your request. However, please note that the price and delivery schedule may vary accordingly.
3.Could you tell me about your company?
A: It would be my pleasure! I'll promptly send you our detailed company introduction document. It contains all the essential information about our company, giving you a clear and comprehensive overview.
4.What sets your company apart?
A: Our key strengths lie in maintaining ample inventory, ensuring uninterrupted supply for future orders. We also pride ourselves on our flexibility, tailoring unique solutions to meet each customer's specific requirements.
5.Can I request samples and get a price quote?
A: Certainly, sample requests are welcome. Samples are priced at the regular bulk rate, and the shipping cost will need to be covered by you.
Product Tags:
|
|
Eltek Solar Charger Telecom Hybrid System 3200W 241119.650 Images
|
