Mean Well Enclosed Switching Power Supply AC/DC UHP Series UHP-200(R) UHP-200A UHP-750 UHP-1500 UHP-2500
Wattage range: 200W~2500W
Features:
- Slim and Low profile
- Fanless design,free air convection
- Built-in active PFC function150%
- peak load capability(100ms)
- High voltage output available for HV type
- DC OK active signal and redundant function(option)
- Operating altitude up to 5000 meter
- LED indicator for power on
Parametets :
| MODEL | UHP-200 -3.3 | UHP-200 -4.2 | UHP-200 -5 | UHP-200 -12 | UHP-200 -15 | UHP-200 -24 | UHP-200 -36 | UHP-200 -48 | UHP-200 -55 |
|
OUTPUT | DC VOLTAGE | 3.3V | 4.2V | 5V | 12V | 15V | 24V | 36V | 48V | 55V |
| RATED CURRENT | 40A | 40A | 40A | 16.7A | 13.4A | 8.4A | 5.6A | 4.2A | 3.6A |
| RATED POWER | 132W | 168W | 200W | 200.4W | 201W | 201.6W | 201.6W | 201.6W | 201.6W |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 300mVp-p | 360mVp-p |
| VOLTAGE ADJ. RANGE | 3.2~3.5V | 3.6~4.4V | 4.5~5.5V | 11.4~12.6V | 14.3~15.8V | 22.8~25.2V | 34.2~37.8V | 45.6~50.4V | 45~58V |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.3% |
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| SETUP, RISE TIME | 2000ms, 80ms/230VAC; 3000ms, 80ms/115VAC at full load;550ms/230VAC for 55V setup time |
| HOLD UP TIME (Typ.) | 10ms/230VAC 10ms/115VAC |
|
INPUT | VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF≥0.94/230VAC PF≥0.98/115VAC at full load |
| EFFICIENCY (Typ.) | 89% | 90% | 91% | 93% | 94% | 94% | 94% | 94% | 94% |
| AC CURRENT (Typ.) | 2.2A/115VAC 1.1A/230VAC |
| INRUSH CURRENT (Typ.)Note.8 | Cold start 40A/115VAC 80A/230VAC |
| LEAKAGE CURRENT | <0.75mA / 240VAC |
|
PROTECTION |
OVERLOAD | 110~140% rated output power |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed |
|
OVER VOLTAGE | 3.8~ 4.6V | 4.62 ~ 5.46V | 5.75 ~ 6.75V | 13.2 ~ 15.6V | 16.5 ~ 19.5V | 26.4 ~ 31.2V | 39.6 ~46.8V | 52.8 ~ 62.4V | 60 ~ 69V |
| Protection type :Shut down O/P voltage,re-power on to recover |
| OVER TEMPERATURE | Protection type :Shut down O/P voltage or Hiccup mode, recovers automatically after temperature goes down |
|
FUNCTION | DC OK SIGNAL(Optional) | Contact rating(max.):15Vdc/10mA resistive load |
| REDUNDANT(Optional) | For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be automatically enabled. This can prevent the system crash, and provide the reliability of system |
|
ENVIRONMENT | WORKING TEMP. | -30 ~ +70℃(Refer to “Derating Curve") |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing |
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) |
| VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
|
SAFETY & EMC (Note.6) |
SAFETY STANDARDS | UL 62368-1,TUV BS EN/EN62368-1,BS EN/EN60335-1(Except for 55V), CCC GB4943, EAC TP TC 004, BSMI CNS14336-1 approved, Design refer to BS EN/EN61558-1,-2-16 |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/ 70%RH |
| EMC EMISSION | Compliance to BS EN/EN55032,GB9254,Class B, BS EN/EN55014,BS EN/EN61000-3-2,-3,EAC TP TC 020,BSMI CNS13438 |
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11;BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level ,EAC TP TC 020 |
|
OTHERS | MTBF | 2472.1 K hrs min. Telcordia SR-332 (Bellcore) ; 257.0K hrs min. MIL-HDBK-217F (25℃) |
| DIMENSION | 194*55*26mm (L*W*H) |
| PACKING | 0.468kg;24pcs/12.2kg/0.49CUFT |
|
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance :includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft) 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 7. R type efficiency slightly less than the Blank type, according to the actual measurement. 8. Inrush current parameter has 10% tolerance . ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx |
Solutions
Our complete solution for telecom enterprises in and out of China offers unparalleled advantages. Our site survey is conducted by highly trained professionals who use advanced techniques to gather comprehensive data. Based on this data, we propose a professional plan that is not only cost - effective but also highly efficient. Our technical support is available 24/7, and our team can resolve issues remotely in most cases, minimizing downtime. Our maintenance services are comprehensive, covering all aspects of the telecommunications infrastructure. With a network of trusted partners around the world, we can provide global coverage and local expertise, giving our clients a competitive edge.
FAQ :
1.Q: What's your approach to quality control?
A: We conduct in - depth testing. Before shipment, all products are put through simulated usage scenarios, including load, full - load, and current sharing tests, ensuring consistent quality.
2.Q: What's the minimum order quantity?
A: There's no minimum. You can order just one item. However, order size impacts pricing and delivery timelines.
3.Q: Can you introduce your company?
A: Absolutely. I'll promptly send our comprehensive company profile, offering a detailed overview of our operations and achievements.
4.Q: What makes your company stand out?
A: Our key strengths are abundant inventory, reliable supply continuity, and the ability to provide customized solutions tailored to diverse customer needs.
5.Q: Can I request samples and get a price quote?
A: Samples are available. They're priced at the bulk rate, and you'll need to cover the shipping cost.
Product Tags:
|
|
AC/DC UHP Series Enclosed Switching Power Supply UHP-750 UHP-1500 Images
|
